Version

RadialGauge<T> Class Members

The following tables list the members exposed by RadialGauge<T>.

Public Constructors
 NameDescription
Public ConstructorRadialGauge<T> ConstructorInitializes a new instance of the RadialGauge class.  
Public Properties
 NameDescription
Public PropertyModelThe model to use to store configuration data.  
Public Methods
 NameDescription
Public MethodBackingBrushOverloaded. Sets the brush to use to fill the backing of the gauge.  
Public MethodBackingCornerRadiusSets the corner rounding radius to use for the fitted scale backings.  
Public MethodBackingInnerExtentSets the inner extent of the gauge backing.  
Public MethodBackingOuterExtentSets the outer extent of the gauge backing.  
Public MethodBackingOutlineOverloaded. Sets the brush to use for the outline of the backing.  
Public MethodBackingOversweepSets the over sweep angle to apply to the backing if it is displaying fitted (in degrees). Must be greater or equal to 0.  
Public MethodBackingShapeSets the type of shape to use for the backing of the gauge.  
Public MethodBackingStrokeThicknessSets the stroke thickness of the backing outline.  
Public MethodCenterXSets the x position of the center of the gauge with the value ranging from 0 to 1.  
Public MethodCenterYSets the y position of the center of the gauge with the value ranging from 0 to 1.  
Public MethodClientEventsModelWidgetBase.ClientEvents  
Public MethodDuplicateLabelOmissionStrategySets the strategy to use for omitting labels if the first and last label have the same value.  
Public MethodFontSets the font.  
Public MethodFontBrushOverloaded. Sets the brush to use for the label font.  
Public MethodHeightChartModelBase.Height.  
Public MethodHtmlAttributesSet HtmlAttributes to the HTML div element  
Public MethodIDChartModelBase.ID  
Public MethodIntervalSets the interval to use for the scale.  
Public MethodIsNeedleDraggingConstrainedSets whether the needle is constrained within the minimum and maximum value range during dragging.  
Public MethodIsNeedleDraggingEnabledSets whether needle dragging is enabled or not.  
Public MethodLabelExtentSets the position at which to put the labels as a value from 0 to 1, measured form the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.  
Public MethodLabelIntervalSets the interval to use for rendering labels. This defaults to be the same interval as the tickmarks on the scale.  
Public MethodMaximumValueSets the maximum value of the scale.  
Public MethodMinimumValueSets the minimum value of the scale.  
Public MethodMinorTickBrushOverloaded. Sets the brush to use for the minor tickmarks.  
Public MethodMinorTickCountSets the number of minor tickmarks to place between major tickmarks.  
Public MethodMinorTickEndExtentSets the position at which to stop rendering the minor tickmarks as a value from 0 to 1, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.  
Public MethodMinorTickStartExtentSets the position at which to start rendering the minor tickmarks as a value from 0 to 1, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.  
Public MethodMinorTickStrokeThicknessSets the stroke thickness to use when rendering minor ticks.  
Public MethodNeedleBaseFeatureExtentSets the extent of the feature which is closest to the base (e.g. a bulb) with a value from -1 to 1. Note: Only some needle shapes respect this property, namely: NeedleWithBulb, RectangleWithBulb, TrapezoidWithBulb, and TriangleWithBulb. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.  
Public MethodNeedleBaseFeatureWidthRatioSets the width of the needle at its feature which is closest to the base (e.g. a bulb) with a value from 0 to 1. Note: Only some needle shapes respect this property, namely: NeedleWithBulb, RectangleWithBulb, TrapezoidWithBulb, and TriangleWithBulb. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.  
Public MethodNeedleBrushOverloaded. Sets the brush to use when rendering the fill of the needle.  
Public MethodNeedleEndExtentSets the extent (from -1 to 1) at which to end rendering the needle, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.  
Public MethodNeedleEndWidthRatioSets the width of the needle at its point using a value from (0 to 1). Note: Only some needle shapes respect this property. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.  
Public MethodNeedleOutlineOverloaded. Sets the brush to use when rendering the outline of the needle.  
Public MethodNeedlePivotBrushOverloaded. Sets the brush to use for filling the needle cap. Note: this only applies to certain cap shapes.  
Public MethodNeedlePivotInnerWidthRatioSets the width of the inner cutout section of the needle cap with a value from 0 to 1. Note: Will only take effect if you have a cap set on the needle that has a cutout section.  
Public MethodNeedlePivotOutlineOverloaded. Sets the brush to use for the outlines of the needle cap.  
Public MethodNeedlePivotShapeSets the shape to use for the needle cap.  
Public MethodNeedlePivotStrokeThicknessSets the stroke thickness to use for the outline of the needle cap.  
Public MethodNeedlePivotWidthRatioSets the width of the cap of the needle with a value from 0 to 1. Note: Will only take effect if you have a cap set on the needle. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.  
Public MethodNeedlePointFeatureExtentSets the extent of the feature which is closest to the point (e.g. the tapering point of a needle) with a value from -1 to 1. Note: Only some needle shapes respect this property. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.  
Public MethodNeedlePointFeatureWidthRatioSets the width of the needle at its feature which is closest to the point (e.g. the tapering point of a needle) with a value from 0 to 1. Note: Only some needle shapes respect this property. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.  
Public MethodNeedleShapeSets the shape to use when rendering the needle from a number of options.  
Public MethodNeedleStartExtentSets the extent (from -1 to 1) at which to start rendering the needle, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.  
Public MethodNeedleStartWidthRatioSets the width of the needle at its point using a value from (0 to 1). Note: Only some needle shapes respect this property. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.  
Public MethodNeedleStrokeThicknessSets the stroke thickness of the needle outline.  
Public MethodPixelScalingRatioSets the scaling value used to affect the pixel density of the control.  
Public MethodRadiusMultiplierSets the multiplying factor to apply to the normal radius of the gauge. The radius of the gauge is defined by the minimum of the width and height of the control divided by 2.0. This introduces a multiplicative factor to that value.  
Public MethodRangeBrushesOverloaded. Assigns the list of brushes to the ranges of the gauge.  
Public MethodRangeOutlinesOverloaded. Assigns the list of outlines to the ranges of the gauge.  
Public MethodRangesBuilds ranges for the gauge.  
Public MethodRenderRender the gauge widget with the accumulated model changes in the wrapper.  
Public MethodScaleBrushOverloaded. Sets the brush to use to fill the background of the scale.  
Public MethodScaleEndAngleSets the end angle for the scale in degrees.  
Public MethodScaleEndExtentSets the position at which to stop rendering the scale as a value from 0 to 1 measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.  
Public MethodScaleOversweepSets the extra degrees of sweep to apply to the scale background. Must be greater or equal to 0.  
Public MethodScaleOversweepShapeSets the oversweep shape to use for the excess fill area for the scale.  
Public MethodScaleStartAngleSets the start angle for the scale in degrees.  
Public MethodScaleStartExtentSets the position at which to start rendering the scale, measured from the center of the gauge as a value from 0 to 1. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.  
Public MethodScaleSweepDirectionSets the direction in which the scale sweeps around the center from the start angle to end angle.  
Public MethodTickBrushOverloaded. Sets the brush to use for the major tickmarks.  
Public MethodTickEndExtentSets the position at which to stop rendering the major tickmarks as a value from 0 to 1, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.  
Public MethodTickStartExtentSets the position at which to start rendering the major tickmarks as a value from 0 to 1, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge.  
Public MethodTickStrokeThicknessSets the stroke thickness to use when rendering ticks.  
Public MethodTransitionDurationSets the number of milliseconds over which changes to the gauge should be animated.  
Public MethodTransitionProgressGets the transition progress of the animation when the control is animating.  
Public MethodValueSets the value at which to point the needle of the gauge.  
Public MethodWidthChartModelBase.Width.  
See Also

View on GitHub